PRODUCTS

Bitumen

Stone / Rock

Saif Bin Darwish Crusher supplies natural rockery stone in varying sizes to suit the landscaping requirement. Often used as the building blocks of a new garden, rockery can lend itself to a large array of different uses from waterfalls, retaining walls, flower beds etc., virtually unaffected by running water and very resilient to the weather.

Landscape stones are as integral a part of any landscape design. Our Landscape stones are used in patios and pathways, in malls, ponds etc and are an integral part of any landscape design.

Product Description Product Image

Rockery & Landscaping 60 – 300 Kg

Standards:
As per Client Requirement

Main Uses:
Waterfalls
Retaining Walls
Roof Garden
Edging Stones for Ponds & Borders

Rockery & Landscaping 3,000 – 7,000 Kg

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

Rockery & Landscaping 250 mm

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

Rockery & Landscaping 250 Kg

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

Non-Ferrous Commodities

Aluminium

S.No. Product Description Specification
Si% Fe% Mg% Cu% Zn% Mn% Ni%
1 ADC 12 10.5 to 12 1.3 max 0.30 max 1.50 to 3.50 1.00 max 0.50 max 0.50 max
2 P 1020 0.1 0.2 0.03 0.01 0.03
3 LM 6 10.0 to 13 0.60 max 0.10 max 0.10 max 0.10 max 0.50 max 0.10 max

 

ADC12

ADC12 is a general-purpose alloy suitable for the manufacture of almost any diecast part. It is often specified on large volume diecast applications in preference to LM 24 because of its lower density.

This means that applications for this alloy are quite wide and varied. Ser-vice conditions which dictate high corrosion resistance or higher than usual ductility would normally require an alternative alloy.

The chemistry present has a marked effect on the mechanical properties achieved; low levels of copper, nickel and manganese reduces the strength at temperatures above 250° C.

For this reason it is advisable to restrict the service conditions to a maximum of 150° C.

The composition of this alloy is typical of that used throughout Europe, Asia and the United States of America and commonly at the automobile industry.

LM 6

Aluminium alloys of this and similar compositions are rather difficult to machine, due to their tendency to drag and to the rapid tool wear caused by their high Silicon content.

Carbide-tipped tools with large rake angles and low cutting speeds give comparatively good results when cutting lubricant and coolant are employed.

Corrosion Resistance
Aluminium LM6 exhibits excellent resistance to corrosion under both ordinary atmospheric and marine conditions. For the severest conditions, this property can be further enhanced by anodic treatment.

Anodising
LM6 can be anodised by any of the common processes, the resulting film ranging in colour from grey to dark brown.

Application and General notes
Having high resistance to corrosion and excellent castability, aluminium LM6 is suitable for most marine 'on deck' castings, water-cooled manifolds and jackets, motor car and road transport fittings, thin section and intricate castings such as motor housings, meter cases and switch boxes, for a very large aluminium casting, e.g. cast doors and panels where ease of casting is essential, for chemical and dye industry castings, e.g. pump parts, and for paint industry and food and domestic castings. It is especially suitable for castings that are to be welded. The ductility of LM6 enables castings to be rectified easily or even modified in shape, e.g. simple components may be cast straight and later bent to the required contour.

LM6 is equally adaptable for sand casting and aluminium die casting (gravity die casting and pressure die casting).
It has excellent resistance to corrosion in marine environments, possesses excellent ductility, but is of medium strength and is not heat treated.
Its strength falls off rapidly at high temperatures. Its elastic limit is low and there is difficulty with machining.

P 1020

Copper

ASTM B49-98 / BS-EN 1977-1998 BWC Typical
Copper, min  % min  99.9 > 99.95
Tellurium, max ppm  2 < 1.0
Selenium, max ppm  2 < 1.0
Bismuth, max  ppm  1 < 1.0
Group, max   3 < 2.0
Antimony, max  ppm  4 < 1.0
Arsenic, max  ppm  5 < 1.0
Tin, max  ppm  5 < 1.0
Lead, max  ppm  5 < 3.0
Iron, max  ppm  10 < 5.0
Nickel, max  ppm  10 < 1.0
Sulfur, max  ppm  15 < 10.0
Silver, max  ppm  25 < 25.0
Oxygen  ppm  100-650  200-350
Surface Oxide  Angstrom max  1000 < 350
       
% Elongation  % min  30% > 40.0%
Tensile strength  Min Mpa 200 > 210
Diameter  Tolerance  ± 0.38  ± 0.38
Conductivity  % IACS  100%Min  > 101.1

Packaging Dimensions:

Outer Diameter 1750 mm
Inner Diameter 900 mm
Height of coils 600 mm
Net Weight Ranges 4050 - 4200 kgs  ( Weld free )
Coil Laying type Laid

Zinc

Silicon

Grade Chemicals  Composition(%)
Si% Fe% Al% Ca%
%(min) %(max)
441 99 0.4 0.4 0.1
553 98.5 0.5 0.5 0.3

 

553

Specifications
Silicon metal 553
Si:99.3%min Fe:0.5%max Al:0.5%max Ca:0.3%max 

Size:10-100mm,0-3mm.

Lumps & Powder 
ISO & SGS quality
Lowest Price

Description:

Metal Silicon 553 is known as a semi-metallic or metalloid, having several of the characteristics of metals. Industrial silicon, is silver grey or black with metallic luster. It has the function of high melting point, good heat resistance, high oxidation resistance, high resistivity. It is the essential basic raw materials of many high-tech industries.

Silicon Metal Applications:

  1. Used in aluminum: an additive to aluminum alloys, silicon is used to increase the fluidity and tenacity of Aluminum and its alloys, which
  2. Used in the sun’s energy to produce domestic and industrial electricity. Used in electronic parts enjoy good castability and weldability accordingly.
  3. Used in producing monocrystalline and polycrystalline silicon of high purity for electronic parts, such as semi conductors, etc.
  4. Used in Automobile Wheel Alloy

441

  1. Silicon Metal can be wdely used in industrial refractories, powder metallurgy industry, And improve the product temperature, wear and oxidation resistance, 
  2. In the organic silicon chemical industry, the industrial silicon powder is the basic raw materials Of organosilicon polymer material. 
  3. Industrial silicon, which can also be called metal silicon, is silver grey or black with metallic luster. It has the function of high melting point, good heat resistance, high oxidation resistance, high resistivity. It is the essential basic raw materials of many high-tech industries.

Plastic Products

Button Wood BR 4010

Polybutadiene Rubber

PRODUCT DESCRIPTION:

Button Wood BR 4010 is a high cis-1,4 Polybutadiene rubber stabilized with a non-staining antioxidant. Button Wood BR 4010 is manufactured by solution polymerization process using stereo-specific Nickel catalyst system to control microstructure, Molecular weight and Molecular weight distribution. Polymer macrostructure of BR4010 has been modified from linear to branched without altering the high cis microstructure that provide good storage stability.

CHARACTERISTICS:

Button Wood BR 4010 is a low Mooney grade generally used in blend with other elastomers and is designed for

  • Good abrasion resistance
  • Excellent flex cracking resilience
  • Good low temperature properties
  • Low cold flow property
  • Excellent filler dispersion and shorter mixing cycles
  • Low die-swell and good dimensional control.

CHARACTERISTICS:

  • Tire tread, sidewall and carcass
  • Conveyor belt coverings
  • Shoe sole, hoses and tube covers
  • Mechanical and sporting goods

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4 @100°C) MU 40+/-5 ASTM-D 1646
Volatiles % 0.50 max. ASTM-D 5668
Extractable % 1.65+/-0.65 ASTM-D 5774
Organic acid % 0.775+/-0.375 ASTM-D 5774
Ash Content % 0.25 max. ASTM-D 5667
Cis 1,4 Content % 96.0 min. Button Wood Method
Appearance % Off white to amber Visual

(1) Typical values; not to be construed as specification limits.

Button Wood BR 4610

Polybutadiene Rubber

PRODUCT DESCRIPTION:

Button Wood BR 4610 is a high cis-1,4 Polybutadiene rubber stabilized with a non-staining antioxidant. Button Wood BR 4610 is manufactured by solution polymerization process using stereo-specific Nickel catalyst system to control microstructure and Molecular weight distribution and provides a highly linear polymer.

CHARACTERISTICS:

Button Wood BR 4610 is a medium Mooney grade generally used in blend with other elastomers and is designed for
  • Excellent abrasion resistance
  • Excellent flex cracking resistance
  • Excellent resilience
  • Good low temperature properties
  • Low rolling resistance

TYPICAL APPLICATIONS:

  • Tire tread, sidewall and carcass
  • Conveyor belt coverings
  • Shoe sole, hoses and tube covers
  • Mechanical and sporting goods

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4 @100°C) MU 40+/-5 ASTM-D 1646
Volatiles % 0.50 max. ASTM-D 5668
Organic acid % 0.775+/-0.375 ASTM-D 5774
Ash Content % 0.25 max. ASTM-D 5667
Cis 1,4 Content % 96.0 min. Button Wood Method
Appearance % Off white to amber Visual

(1) Typical values; not to be construed as specification limits.

Button Wood BR 5510

Polybutadiene Rubber

PRODUCT DESCRIPTION:

Button Wood BR 5510 is a high cis-1,4 Polybutadiene rubber stabilized with a non-staining antioxidant. Button Wood BR 5510 is manufactured by solution polymerization process using stereo-specific Nickel catalyst system to control microstructure and Molecular weight distribution and provides a highly linear polymer.

CHARACTERISTICS:

Button Wood BR 4610 is a high Mooney grade generally used in blend with other elastomers and is designed for
  • Excellent abrasion resistance
  • Excellent flex cracking resistance
  • Excellent resilience
  • Good low temperature properties
  • Low rolling resistance

TYPICAL APPLICATIONS:

  • Tire tread, sidewall and carcass
  • Conveyor belt coverings
  • Shoe sole, hoses and tube covers
  • Mechanical and sporting goods

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4 @100°C) MU 55+/-5 ASTM-D 1646
Volatiles % 0.50 max. ASTM-D 5668
Organic acid % 0.775+/-0.375 ASTM-D 5774
Ash Content % 0.25 max. ASTM-D 5667
Cis 1,4 Content % 96.0 min. Button Wood Method
Appearance % Off white to amber Visual

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood EPDM 245

Ethylene Propylene Diene Rubber

PRODUCT DESCRIPTION:

Button Wood EPDM 245 is a low Mooney viscosity polymer with low ethylene and medium ENB grade produced by solution polymerization using metallocene catalyst. It has a broad molecular weight distribution for excellent compounding and processability even without addition of a plasticizer. It can be used as a polymeric plasticizer in blends with other high viscosity polymers.

CHARACTERISTICS:

Button Wood EPDM 245 is designed for:
  • Excellent processability resulting in shorter mixing and molding times
  • Good low temperature properties
  • Good low temperature flexibility and compression set
  • Fast cure rate and high cure state

TYPICAL APPLICATIONS:

  • Brake parts
  • Precision seals
  • Gaskets
  • Molded foam sheets
  • Electrical connectors
  • Hose mandrels
  • Other molded articles

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4, 125°C) MU 26 ASTM-D 1646
Ethylene Content Wt% 50 ASTM-D 3900
Ethylidene Norbornene (ENB) Content Wt% 4.2 ASTM-D 6047

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood EPDM 657

Ethylene Propylene Diene Rubber

PRODUCT DESCRIPTION:

Button Wood EPDM 657 is a high ethylene and medium ENB grade produced by solution polymerization using metallocene catalyst. It has a tailored molecular weight distribution with precise control of molecular composition and architecture. This product is available in pellet form.

CHARACTERISTICS:

Compared to typical narrow MWD grades SABIC™ EPDM 657 is designed for:
  • Better physical properties
  • Improved mixing and mill handling
  • Improved extrusion characteristics
  • High filler loadable

TYPICAL APPLICATIONS:

  • Hoses
  • Mechanical goods
  • Extruded profiles
  • Low voltage wire & cable insulation
  • Gaskets and seals.

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4, 125°C) MU 60 ASTM-D 1646
Ethylene Content Wt% 73 ASTM-D 3900
Ethylidene Norbornene (ENB) Content Wt% 5 ASTM-D 6047

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood EPDM 756

Ethylene Propylene Diene Rubber

PRODUCT DESCRIPTION:

Button Wood EPDM 756 is a high ethylene and medium ENB grade produced by solution polymerization using metallocene catalyst. It has a tailored molecular weight distribution. This product is available in pellet form.

CHARACTERISTICS:

Compared to typical narrow MWD grades Button Wood EPDM 756 is designed for:
  • Smooth and fast extrusion
  • Improved mixing, mill handling and physical properties
  • Improved oil retention and cure bloom in compounds
  • High filler loadable
  • Fast curing

TYPICAL APPLICATIONS:

  • Industrial hoses
  • Automotive hoses and belts
  • Extruded profiles
  • Auto weather seals
  • Low voltage insulation

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4, 125°C) MU 72 ASTM-D 1646
Ethylene Content Wt% 69 ASTM-D 3900
Ethylidene Norbornene (ENB) Content Wt% 5 ASTM-D 6047

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood EPDM 855

Ethylene Propylene Diene Rubber

PRODUCT DESCRIPTION:

Button Wood EPDM 855 is a high mooney viscosity, medium ethylene and ENB grade produced by solution polymerization using metallocene catalyst. It has a broad molecular weight distribution. It is available in fragile bale.

CHARACTERISTICS:

Button Wood EPDM 855 designed for:
  • Smooth and fast extrusion
  • Improved mixing, mill handling and physical properties
  • Improved oil retention and cure bloom in compounds
  • High filler loadable
  • Fast curing

TYPICAL APPLICATIONS:

  • Automotive weather-seals profiles
  • Automotive coolant and air hoses
  • Industrial gasket and O-ring
  • Washing machine gaskets

TYPICAL DATA:

PROPERTIES Unit Typical Value (1) Test Method
Mooney Viscosity (ML 1+4, 125°C) MU 80 ASTM-D 1646
Ethylene Content Wt% 55 ASTM-D 3900
Ethylidene Norbornene (ENB) Content Wt% 5.2 ASTM-D 6047

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood N220

Carbon Black

PRODUCT DESCRIPTION:

Button Wood N220 is a furnace grade reinforcing carbon black for improved performance of rubber compound

CHARACTERISTICS:

Button Wood N220 is designed for good wear and tear, stress/strain properties and easy processing

TYPICAL APPLICATIONS:

  • Truck and high performance tread compound
  • Premium procure tread compound
  • Conveyor belts

TYPICAL DATA:

Primary Analytical Test Properties Unit Target
value
Recommended
Specification
Test Method
Iodine Adsorption Number g/kg 121 116 to 126 ASTM D1510
Oil Absorption No. cm³/100g 114 109 to 119 ASTM D2414
Tint Strength % 116 111 to 121 ASTM D3265

 

Secondary Physical Test Properties Unit Target
value
Recommended
Specification
Test Method
Pour Density kg/m³ 350 320 to 380 ASTM D1510
Fines Content
Bulk shipments
Bag shipments
%   6.0 max.
8.0 max.
ASTM D1508
Sieve Residue
No. 325 mesh
No.35 mesh
ppm 0 300 max.
0
ASTM D1514
Heating Loss Bulk shipments %   1.5 max. ASTM D1509

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood N330

Carbon Black

PRODUCT DESCRIPTION:

Button Wood N330 is a furnace grade reinforcing carbon black for improved performance of rubber compound

CHARACTERISTICS:

Button Wood N330 designed for good wear and tear, stress/strain properties, and easy processing

TYPICAL APPLICATIONS:

  • Tire treads, sidewall, filler, curing bladders
  • Belts and hoses
  • Mechanical goods, Gaskets and O-rings
  • Footwear and sheeting

TYPICAL DATA:

Primary Analytical Test Properties Unit Target
value
Recommended
Specification
Test Method
Iodine Adsorption Number g/kg 82 77 to 87 ASTM D1510
Oil Absorption No. cm³/100g 102 97 to 107 ASTM D2414
Tint Strength % 104 99 to 109 ASTM D3265

 

Secondary Physical Test Properties Unit Target
value
Recommended
Specification
Test Method
Pour Density kg/m³ 376 352 to 400 ASTM D1513
Fines Content
Bulk shipments
Bag shipments
%   6.0 max.
8.0 max.
ASTM D1508
Sieve Residue
No. 325 mesh
No.35 mesh
ppm 0 300 max.
0
ASTM D1514
Heating Loss Bulk shipments %   1.2 max. ASTM D1509

(1) Typical values; not to be construed as specification limits.

Polymers

Button Wood N339

Carbon Black

PRODUCT DESCRIPTION:

Button Wood N339 is a furnace grade reinforcing carbon black for improved performance of rubber compound

CHARACTERISTICS:

Button Wood N339 designed for good wear and tear, stress/strain properties, and easy processing

TYPICAL APPLICATIONS:

  • Tire treads, sidewall, filler, curing bladders
  • Conveyor belts.
  • Solid tires.
  • Motor mounts.

TYPICAL DATA:

Primary Analytical Test Properties Unit Target
value
Recommended
Specification
Test Method
Iodine Adsorption Number g/kg 90 85 to 95 ASTM D1510
Oil Absorption No. cm³/100g 120 115 to 125 ASTM D2414
Tint Strength % 111 106 to 116 ASTM D3265

Secondary Physical Test Properties Unit Target
value
Recommended
Specification
Test Method
Pour Density kg/m³ 344 320 to 368 ASTM D1513
Fines Content
Bulk shipments
Bag shipments
%   6.0 max.
8.0 max.
ASTM D1508
Sieve Residue
No. 325 mesh
No.35 mesh
ppm 0 300 max.
0
ASTM D1514
Heating Loss Bulk shipments %   1.2 max. ASTM D1509

(1) Typical values; not to be construed as specification limits.

Xps ( Extruded Polystyrene Sheets)

XPS or foamular 250 is a polystyrene foam insulation extruded into rigid boards. It has closed cell cores which have interconnecting walls of consistent thickness with no voids. This structure gives high insulating values, high compressive strength and superior moisture resistance.

We are the global Exporter and Supplier of the qualitative range of Extruded Polystyrene Sheets. The Extruded Polystyrene Sheets that we provide are manufactured by conforming to the quality standards so as to ensure their superior functionality. Our range of Extruded Polystyrene Sheets is widely acclaimed for durability and quality. These Extruded Polystyrene Sheets are available at the market leading prices.

Benefits

XPS insulation gives an even surface to an exterior finish which helps in a better thermal performance of the exterior wall for increased energy saving and occupant comfort.

It has a closed cell structure and continuous skin surface, front and back which prevents moisture absorption form sources like leakage, condensation, freeze/thaw cycling etc.

Attributes :
  • Excellent quality
  • Durable
  • Superb in performance
  • Affordable price
Used To Provide Insulation To :
  • Floors
  • Structures
  • Pitched roofs
  • Cavity walls
Applications :

XPS or foamular 250 is mostly used in areas like concrete flat roofs, parking decks, metal roofs, exterior Walls, cavity walls, cold storage floors, cold storage walls, ice rinks, and sandwich panels.

EPS

Fiber glasswool

Fiber glasswool is A quality Glass Wool which is made from pure silica sand does not support combustion even in direct, prolonged contact with flames. It emits no toxic fumes or smoke, the two biggest hazards to health and life in the event of a fire, with BIOSOLUBLE FIBERS thus making its application and use safer. Glasswool is a complete fire safe product.

Specifications

(available with aluminium foil (FSK) and without aluminium foil (UNF)

DENSITY THICKNESS
12 kg/m3 25,50 MM
16 kg/m3 25,50 MM
24 kg/m3 25,50 MM
32 kg/m3 25,50 MM
48 kg/m3 25,50 MM

Specifications

  • Relatively easy to install if ceiling space is open
  • Both Heating and Cooling properties
  • Reduces noise - Acoustic properties
  • Resistant to Fire
  • Resistant to Insects
  • Does Not Shrink

Rockwool

We are the global Exporter and Supplier of the best quality Rockwool Insulation Material. It is an essential component of plant and building construction. The Rockwool Insulation Material helps to conserve energy thereby saving money. Rockwool Insulation Material is the most proven and commonly applicable solution for the conservation of energy and consequently contributes to environment protection. We make available the Rockwool Insulation Material at the market leading prices.

Attributes :

  • Excellent quality
  • Durable
  • Superb in performance
  • Affordable price

Used To Provide Insulation To :

  • Superior quality
  • Provide ample insulation
  • Reasonable price
  • Environmental friendly

Used In : Plant and building construction

Features Of Rockwool Hot Insulation :

  • Reduces noise levels
  • Heat loss reduction
  • Contributes to lower the CFC emission
  • Based on the principle of optimum economic insulation thickness
  • Personal protection, by restraining the surface temperature of the jacket or the covering
  • Optimization of the use of heat tracers
  • Protection of persons and installation in case of fire
  • Controls temperature to preserve process conditions
  • Prevents excess temperature drops
  • Prevents condensation inside pipes and ducts / outside pipes and ducts

Applications :

  • Sound proofing
  • Acoustics
  • Textile mills

Dimensions : 48 kg Density to 150 kg Density

Made With : Glass and Rock

Rubber Based Adhesive

We are a well-recognized Exporter and Supplier of the best quality Rubber Based Adhesive in the global market. Ours is a multipurpose synthetic Rubber Based Adhesive that is known for its outstanding bonding strength together with high peel value. The Rubber Based Adhesive is also popularly known as Contact Adhesive. The Rubber Based Adhesive is used for stain free bonding between substrates such as wood, ceramic, rexin, leather, rubber, canvas, fabric, etc. We offer the Rubber Based Adhesive at very economical prices.

Attributes :

  • Excellent quality
  • Superior performance
  • Outstanding bonding strength
  • Economical price

Used For Bonding :

  • Wood
  • Ceramic
  • Rexin
  • Leather
  • Rubber
  • Canvas
  • Fabric, etc.

Varied Rubber Based Adhesive :

  • China adhesive
  • Polygrip, etc
Chemical Composition : A blends of synthetic rubbers and synthetic resin dissolved into a combination of organic solvents.

Dimensions : 5 liter drum, 15 liter drum, 25 liter, 30 liter

Price : Depending upon the liter drum

XLPE Sheets

We are known as the most reliable Exporter and Supplier of the XLPE Sheets across the world. The XLPE Sheets that we provide are procured from reliable manufacturers for ensuring superior quality of the product. We are offering an extensive range of XLPE Sheets that boosts of excellent performance. Our range of XLPE Sheets is available at the most competitive prices.

Attributes :

  • Superior quality
  • Excellent performance
  • Competitive price

Nitrile Insulation Sheets

The Nitrile Insulation Sheets are used for providing proper insulation in buildings, roofs, floors, etc. We are into exporting and supplying a huge range of Nitrile Insulation Sheets, which boosts of high quality and superior performance. The Nitrile Insulation Sheets that we offer are highly efficient in functionality as they are manufactured in compliance with the set industrial standards. We offer these Nitrile Insulation Sheets at very reasonable prices.

Attributes :

  • Excellent performance
  • Great quality
  • Reasonable price

Used For : Providing insulation

Lightly Resin Bonded Mattress

We are offering a wide range of Lightly Resin Bonded Mattress that is manufactured from high grade materials. The Lightly Resin Bonded Mattress that we export and supply in the worldwide market is recognized for its excellent quality. We provide the Lightly Resin Bonded Mattress in varied specifications as per the requirement of our clients. Our range of Lightly Resin Bonded Mattress is highly economical.

Attributes :

  • Excellent quality
  • Durable
  • Available in varied specifications
  • Economical

Polyurethane Foam

The Polyurethane Foam that we provide has earned a wide appreciation in the national and international markets owing to its good insulation properties. Polyurethane Foam, offered by us, is widely used in cold storages, air conditioning, and many others. We obtain the entire range of Polyurethane Foam from reputed manufacturers ensuring its supreme quality and durability. Our range of Polyurethane Foam is available at the most reasonable price range.

Attributes :

  • Durable
  • Excellent quality
  • Lightweight
  • High strength

Used In :

  • Air conditioning
  • Cold storages
  • Automotive seats
  • Carpet backing

Technical specifications :

  • Low thermal conductivity : (K = 0.014 K Cal/mhroc)
  • Fire-retardant and self extinguishing as per ASTMD-1962-68 BS-476
  • Continuous operating temperature : -200oC to +150oC
  • Saves investment upto 30% working time up till 90% in comparison to other traditional methods of insulation and sealing

Available In Sizes : 1/2"to 12"

Features :

  • Easy to handle
  • High compressive strength
  • Shrink proof
  • Light in weight
  • Water resistant
  • Microbes and pests proof (such as parasites, ants, termites, fungi etc. besides pthers)
  • Chemical Resistant (Dilute acids, mineral oils, diesel fuel, alkali, normal petrol, etc.)
  • Compatible to metals such as Gypsum, bricks, wood & paper

Physical & Mechanical Properties

Core Density BS4370 35 Kg./Cu.M
Average Density BS4370 35-40 Kg./Cu.M
Compressive strength parallel to rise BS 4370 Minimum 1.7 Kg./Sq.CM.
Compressive Strength perpendicular to rise BS4370 Minimum 2.0 Kg./Sq.CM.
Close Cells % BS 4735 90-95 % BS 4735 90-95 %
Burning Characteristics BS 4735 (Maximum 125mm) Self Extinguishing
Thermal Conductivity Initial at 10oC mean BS 4370 .014K cal/mhr. oC 016W/m oC -
Water vapour transmission 7gcm/m2 14 h mm Hg (3 perm inches) -

Insulation Tapes

The company is acknowledged as a trustworthy Insulation Tapes Exporters and Suppliers based in India. Insulation Tapes, provided by us, are extensively used in ducting, air conditioning, cold storages, etc. These Insulation Tapes are appreciated for their high insulation properties, chemical resistance and good bonding strength. Moreover, we specialize in providing these Insulation Tapes in proper packaging that too within the scheduled timeframe.

Attributes :

  • Excellent bonding strength
  • Superior quality
  • Durable
  • Economical

Used In :

  • Ducting
  • Air conditioning
  • Cold storages, etc.

Raw Materials Used :

  • Aluminium
  • Nitile
  • Trosline

Types :

  • Trosline tape
  • Aluminium tape
  • Duct tape
  • Nitrile tape

Thermocol Sheets

We are specialized in the exporting and supplying of a wide range of Thermocol Sheets in the national as well as international markets. We procure the Thermocol Sheets from reliable dealers for more reliability. We offer the Thermocol Sheets at the market leading rates for our esteemed clients. We are known among the dependable Thermocol Sheets Exporters and Suppliers, located in India.

Attributes :

  • Excellent quality
  • Superior performance
  • Durable
  • Reasonable price

Used As Insulation Tiles In :

  • Homes
  • Offices
  • Banks
  • Hotels
  • Showrooms, etc.

Aluminium Ducts

Heat resistant, leak proof, flexible, excellent ductility and durability best describe the quality of Aluminium Ducts, offered by us. These Aluminium Ducts are manufactured by using aluminium and are obtainable in different sizes. Aluminium Ducts are extensively used in air conditioning, exhausts and ducting. Consequently, we are identified as one of the renowned Aluminium Ducts Exporters and Suppliers based in India.

Attributes :

  • Super fine quality
  • Excellent performance
  • Durable
  • Affordable

Used In :

  • Air conditioning
  • Exhausts
  • Ducting

Types :

  • Semi Rigid
  • Insulated
  • Uninsulated

Available Sizes :

  • 4"
  • 6"
  • 8"
  • 10"
  • 12" and many more
Colors & packaging available : Silver ducts & Boxes