Currently editing: /home/buttonwoodcommod/public_html/Stone-Rock.html Encoding: Switch to Code Editor Save Buttonwood Commodities F.Z.C.
9 TYPES OF MATERIALS

1. Aggregates

Buttonwood Commodities provides a diverse range of construction aggregates to meet the needs of an increasingly technical industry. All of our construction materials are produced under an ISO 9000 quality regime, and are available direct from the quarry or delivered.

Quarried from the finest selected Gabbro, our broad range of aggregates are renowned for their consistency and quality. Everything from large dry-stone walling material to fine aggregates is available in bulk and certain grades are also available as per specific customers’ requirements

1.1 Classified Crushed Sand (Fine Aggregate) 0 – 5 mm (less than 3% filler)

1.2 Crushed Sand (Fine Aggregate) 0 – 5 mm (9% to 11% filler)

1.3 Crushed Aggregate (Coarse Aggregate) 5 – 10 mm

1.4 Crushed Aggregate (Coarse Aggregate) 10 – 20 mm

1.5 Crushed Aggregate (Coarse Aggregate) 20 – 25 mm

1.6 Crushed Aggregate (Coarse Aggregate) 20 – 32 mm

1.7 Crushed Aggregate (Coarse Aggregate) 20 – 37.5 mm

1.8 Crushed Aggregate (Coarse Aggregate) 20 – 42 mm

Product Description Product Image

1.1 Crushed Sand (Fine Aggregate) 0 – 5 mm (9% to 11% filler)

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Construction Industry
Pavement Concrete Construction (PCC)

1.2 Classified Crushed Sand (Fine Aggregate) 0 – 5 mm (less than 3% filler)

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Concrete Production
Construction Industry
Structural Backfill
Pavement Concrete Construction (PCC)
Sand Bed for Interlocking Tiles

1.3 Crushed Aggregate (Coarse Aggregate) 5 – 10 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Concrete production
Roads
Highways
Airport
Pavement Concrete Construction (PCC)

1.4 Crushed Aggregate (Coarse Aggregate) 10 – 20 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Concrete production
Roads
Highways
Airport
Pavement Concrete Construction (PCC)

1.5 Crushed Aggregate (Coarse Aggregate) 20 – 25 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Dams and Water Reservoir
Pavement Concrete Construction (PCC)

1.6 Crushed Aggregate (Coarse Aggregate) 20 – 32 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Wet Mix Macadam
Filter Material
Mass Concrete
Pavement Concrete Construction (PCC)

1.7 Crushed Aggregate (Coarse Aggregate) 20 – 37.5 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt Production
Wet Mix Macadam
Filter Material
Mass Concrete
Pavement Concrete Construction (PCC)

1.8 Crushed Aggregate (Coarse Aggregate) 20 – 42 mm

Standards:
ASTMC 33 /C33 M-08, ASTM D-1073
BS 882
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
All International Standards

Main Uses:
Asphalt production
Wet Mix Macadam
Filter Material
Mass Concrete
Pavement Concrete Construction (PCC)

2. Sub-Base, Road-Base & Wet Mix Material

Subbase, Roadbase and Wet Mix Macadam consist of crushed aggregate which is used as a base layer for asphalt roads. BWC supplies Subbase and Roadbase has high specific gravity and is durable and sound. Due to the high CBR value this material has an added advantage in the pavement design and helps reduce the pavement thickness.

BWC provides Wet Mix produced in an automatic controlled mixing plant with total control of moistures.

2.1 Sub-Base 0 – 42 mm & 0 – 50 mm

2.2 Road-Base 0 – 42 mm & 0 – 50 mm

2.3 Wet Mix 0 – 42 mm

Product Description Product Image

2.1 Sub-Base 0 – 42 mm & 0 – 50 mm

Standards:
BS 13285-2003
ASTM D 1241
Specification of Highway Works Vol 1 -800
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Highways
Runways
Asphalt roads
Hard stand areas
Car parking areas
Filling material

2.2 Road-Base 0 – 42 mm & 0 – 50 mm

Standards:
BS 13285-2003
ASTM D 1241
Specification of Highway Works Vol 1 -800
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Highways
Runways
Roads
Hard stand areas
Car parking areas
Filling material

2.3 Wet Mix 0 – 42 mm

Standards:
BS 13285-2003
ASTM D 1241
Specification of Highway Works Vol 1 -800
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Highways
Runways
Roads
Hard stand areas
Car parking areas
Filling material
Short Crete Concrete

3. Marine Material

BWC supplied Marine materials are classified into Armour Rock, Under Layer, Quarry Run and Crushed Rock. Marine Materials supplied from the crusher as per customer requirements are conforming to CIRIA CUR CETMEEF 2007, The Rock Manual C683, CIRIA, London and other International Standards.

3.1 Quarry Run 1 – 500 Kg

3.2 Quarry Run 10 – 500 Kg

3.3 Under Layer 300 – 1000 Kg

3.4 Under Layer 500 – 1000 Kg

3.5 Armour Rock 1000 – 2000 Kg

3.6 Armour Rock 1000 – 4000 Kg

3.7 Armour Rock 3000 – 6000 Kg

3.8 Armour Rock 4000 – 7000 Kg

3.9 Selected Crushed Rock 5 – 60 Kg

3.10 Selected Crushed Rock 60 – 300 Kg

3.11 Single Size Rock 250 mm

3.12 Single Size Rock 400 mm

3.13 Single Size Rock 250 Kg

Product Description Product Image

3.1 Quarry Run 1 – 500 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.2 Quarry Run 10 – 500 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.3 Under Layer 300 – 1000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.4 Under Layer 500 – 1000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.5 Armour Rock 1000 – 2000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.6 Armour Rock 1000 – 4000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.7 Armour Rock 3000 – 6000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.8 Armour Rock 4000 – 7000 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.9 Selected Crushed Rock 5 – 60 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.10 Selected Crushed Rock 60 – 300 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.11 Single Size Rock 250 mm

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.12 Single Size Rock 400 mm

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

3.13 Single Size Rock 250 Kg

Standards:
CIRIA CUR CETMEEF (2007).
The Rock Manual. C683, CIRIA, London

Main Uses:
Dams
Artificial Islands
Reclamation
Coastal Protection
Quay Walls
Revetments

4. Capillary Breaker & Pervious Backfill

Improved Sub-Grade or Pervious Back Fill – Any course or courses of select or improved material between the foundation soil and the sub base is usually referred to as the improved sub grade. The improved sub grade can be made up of two or more courses of different quality materials aggregate.

BWC provides different types of improved sub-grade and capillary as per the standards of ASHTO. We produce material in sizes of 0-10 mm, 10-20 mm and 20-100 mm for layer thickness of 180, 150, 100, 50 mm layer size as foundation to roads and better drainage layer.

4.1 Capillary 20 – 100 mm

4.2 Pervious Backfill Type III 10 mm

4.3 Pervious Backfill Type IV 0 – 10 mm

4.4 Pervious Backfill Type V 10 – 200 mm

Product Description Product Image

4.1 Capillary 20 – 100 mm

Standards:
ASTM C 131, 33
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Pervious Concrete Pavement Construction
Foundation layer for road works
Drainage layer for water logged areas
Soil Stabilizer
Dams and Reservoir
Canal Lining
Mass Rock Filling
Mass Concrete

4.2 Pervious Backfill Type III 10 mm

Standards:
ASTM C 131, 33
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Pervious Concrete Pavement Construction
Bedding layer for pipes
Foundation for sidewalks and culverts
Drainage layer
Dams and Reservoir
Canal Lining

4.3 Pervious Backfill Type IV 0 – 10 mm

Standards:
ASTM C 131, 33
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards
According to Various Department Standards

Main Uses:
Pervious Concrete Pavement Construction
Bedding layer for pipes
Foundation for sidewalks and culverts
Dams and Reservoir
Canal Lining
Mass Rock Filling
Mass Concrete

4.4 Pervious Backfill Type V 10 – 200 mm

Standards:
ASTM C 131, 33
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Pervious Concrete Pavement Construction
Foundation layer for road works
Drainage Layer
Soil Stabilizer
Improved Sub grade
Dams and Reservoir
Canal Lining
Mass Rock Filling
Mass Concrete
Pipe Surround, Drainage & Filter Material

5. Pipe Surround, Drainage & Filter Material

Pipe Bedding Material or Drainage Material consist of crushed aggregate which provide the base to pipes, allows drainage and avoid the capillary action.

BWC provides clean and durable material with Compaction Factor less than 0.15 and suitable for all types of pipes like GRP, RC, UPVC. It acts as a good foundation for pipes, allows free drainage and avoids capillary action

5.1 Pipe Surround Drainage & Filter Material Pervious Backfill Type I (10 – 20 mm)

5.2 Pipe Surround Drainage & Filter Material Pervious Backfill Type II (0 – 20 mm)

5.3 Pipe Surround Drainage & Filter Material Pervious Backfill Type III (5 – 10 mm)

5.4 Pipe Surround Drainage & Filter Material Pervious Backfill Type IV (0 – 10 mm)

Product Description Product Image

5.1 Pipe Surround Drainage & Filter Material Pervious Backfill Type I (10 – 20 mm)

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
In Trenches
Bedding Layer for Pipes
Earthworks
Civil Engineering Structures

5.2 Pipe Surround Drainage & Filter Material Pervious Backfill Type II (0 – 20 mm)

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
In Trenches
Bedding Layer for Pipes
Earthworks
Civil Engineering Structures

5.3 Pipe Surround Drainage & Filter Material Pervious Backfill Type III (5 – 10 mm)

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
In Trenches
Bedding Layer for Pipes
Earthworks
Civil Engineering Structures

5.4 Pipe Surround Drainage & Filter Material Pervious Backfill Type IV (0 – 10 mm)

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
In Trenches
Bedding Layer for Pipes
Earthworks
Civil Engineering Structures

6. Rip-Rap & Gabion Rocks

BWC supplied Rip Rap comes in a variety of sizes. Rip Rap is most often used in shoreline protection, to stabilize streambanks, on slopes etc. Our Rip Rip is hard and angular and of such quality that it will not disintegrate on exposure to water or weathering.

We also offer caged riprap structures known as Gabions. Gabions are also used for channel linings, retaining walls, bridge abutments, shore and beach protection.

6.1 Rip Rap 100 – 200 mm

6.2 Rip Rap 100 – 300 mm

6.3 Rip Rap 150 – 200 mm

6.4 Rip Rap 150 – 300 mm

6.5 Rip Rap 200 – 300 mm

6.6 Gabions 50 – 150 mm

6.7 Gabions 75 – 200 mm

Product Description Product Image

6.1 Rip Rap 100 – 200 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.2 Rip Rap 100 – 300 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.3 Rip Rap 150 – 200 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.4 Rip Rap 150 – 300 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.5 Rip Rap 200 – 300 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.6 Gabions 50 – 150 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

6.7 Gabions 75 – 200 mm

Standards:
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Dams
Erosion Control
Culverts
Waterway Falls
Bridge Abutments,
Shoreline Protection
Sea Wall Protection
Drainage Channel

7. Ballast & Sub-ballast

BWC provides aggregates that is suitable as ballast and sub-ballast as per the requirement and standards of different rail industries. Our aggregate source being gabbro is having less water absorption and high electric resistance.

Our Ballast and Sub ballast is suitable to serve the Latest Heavy and Fast Moving Train Net Work.

7.1 Ballast 20 – 42 mm

7.2 Ballast 25 – 63 mm

7.3 Sub-ballast 0 – 20 mm

Product Description Product Image

7.1 Ballast 20 – 42 mm

Standards:
ASTM C33 -Sr 4
Various Department Standards

Main Uses:
Supports the rails and sleepers
Facilitates Drainage

7.2 Ballast 25 – 63 mm

Standards:
BS EN 13450
ASTM C33 -Sr 4
Various Department Standards

Main Uses:
Supports the rails and sleepers
Facilitates Drainage

7.3 Sub-ballast 0 – 20 mm

Standards:
BS EN 13450
Various Department Standards

Main Uses:
Forms a transition zone between the ballast and the sub grade to avoid migration of soil into the ballast.

8. Rockery Stones & Landscaping

BWC supplies natural rockery stone in varying sizes to suit the landscaping requirement. Often used as the building blocks of a new garden, rockery can lend itself to a large array of different uses from waterfalls, retaining walls, flower beds etc., virtually unaffected by running water and very resilient to the weather.

Landscape stones are as integral a part of any landscape design.

Our Landscape stones are used in patios and pathways, in malls, ponds etc and are an integral part of any landscape design.

8.1 Rockery & Landscaping 60 – 300 Kg

8.2 Rockery & Landscaping 3,000 – 7,000 Kg

8.3 Rockery & Landscaping 250 mm

8.4 Rockery & Landscaping 250 Kg

Product Description Product Image

8.1 Rockery & Landscaping 60 – 300 Kg

Standards:
As per Client Requirement

Main Uses:
Waterfalls
Retaining Walls
Roof Garden
Edging Stones for Ponds & Borders

8.2 Rockery & Landscaping 3,000 – 7,000 Kg

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

8.3 Rockery & Landscaping 250 mm

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

8.4 Rockery & Landscaping 250 Kg

Standards:
As per Client Requirement

Main Uses:
Gardens
Landscape areas
Decoration
Waterway Falls

9. Dust & Sand

BWC supplies clean, quality coarse and fine dust and sand for a broad range of applications. The finest gradings produced in the aggregate crushing and screening process at the Crusher has an upper limit of 5, 3, 2 or 1 mm. The smallest fractions are less than 75 micron in diameter.

Sand is processed via dry screening to provide compliant material for concrete and asphalt. Sand from the crusher can also be blended with other quarry products to meet specific job requirements including filter media, bedding materials, pathways etc.

9.1 Classified Crushed Sand (less than 3% filler) 0 – 5 mm

9.2 Crushed Sand (9% to 11% filler) 0 – 5 mm

9.3 Crushed Sand (13% filler) 0 – 1 mm

9.4 Filler 0 – 0.075 mm

Product Description Product Image

9.1 Classified Crushed Sand (less than 3% filler) 0 – 5 mm

Standards:
ASTM C 404 -07
ASTM C144 -04
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Concrete Production
Construction Industry
Structural Backfill
Pavement Concrete Construction (PCC)
Sand Bed for Interlocking Tiles

9.2 Crushed Sand (9% to 11% filler) 0 – 5 mm

Standards:
ASTM C 404 -07
ASTM C144 -04
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Asphalt Production
Construction Industry
Pavement Concrete Construction (PCC)

9.3 Crushed Sand (13% filler) 0 – 1 mm

Standards:
ASTM C 404 -07
ASTM C144 -04
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Asphalt Production
Construction Industry

9.4 Filler 0 – 0.075 mm

Standards:
ASTM C 404 -07
ASTM C144 -04
Abu Dhabi Municipality Specification, Al Ain Municipality Specification…….. etc
Department of Transportation (DOT) – Abu Dhabi
RTA (Roads and Transportation Authority) – Dubai
According to Various Department Standards, Developers and Highway Agencies Standards

Main Uses:
Construction Industry
Manufacturing of false ceiling

Data Sheets for Items from 1 to 9

XLPE Sheets

We are known as the most reliable Exporter and Supplier of the XLPE Sheets across the world. The XLPE Sheets that we provide are procured from reliable manufacturers for ensuring superior quality of the product. We are offering an extensive range of XLPE Sheets that boosts of excellent performance. Our range of XLPE Sheets is available at the most competitive prices.

Attributes :

  • Superior quality
  • Excellent performance
  • Competitive price

Nitrile Insulation Sheets

The Nitrile Insulation Sheets are used for providing proper insulation in buildings, roofs, floors, etc. We are into exporting and supplying a huge range of Nitrile Insulation Sheets, which boosts of high quality and superior performance. The Nitrile Insulation Sheets that we offer are highly efficient in functionality as they are manufactured in compliance with the set industrial standards. We offer these Nitrile Insulation Sheets at very reasonable prices.

Attributes :

  • Excellent performance
  • Great quality
  • Reasonable price

Used For : Providing insulation

Lightly Resin Bonded Mattress

We are offering a wide range of Lightly Resin Bonded Mattress that is manufactured from high grade materials. The Lightly Resin Bonded Mattress that we export and supply in the worldwide market is recognized for its excellent quality. We provide the Lightly Resin Bonded Mattress in varied specifications as per the requirement of our clients. Our range of Lightly Resin Bonded Mattress is highly economical.

Attributes :

  • Excellent quality
  • Durable
  • Available in varied specifications
  • Economical

Polyurethane Foam

The Polyurethane Foam that we provide has earned a wide appreciation in the national and international markets owing to its good insulation properties. Polyurethane Foam, offered by us, is widely used in cold storages, air conditioning, and many others. We obtain the entire range of Polyurethane Foam from reputed manufacturers ensuring its supreme quality and durability. Our range of Polyurethane Foam is available at the most reasonable price range.

Attributes :

  • Durable
  • Excellent quality
  • Lightweight
  • High strength

Used In :

  • Air conditioning
  • Cold storages
  • Automotive seats
  • Carpet backing

Technical specifications :

  • Low thermal conductivity : (K = 0.014 K Cal/mhroc)
  • Fire-retardant and self extinguishing as per ASTMD-1962-68 BS-476
  • Continuous operating temperature : -200oC to +150oC
  • Saves investment upto 30% working time up till 90% in comparison to other traditional methods of insulation and sealing

Available In Sizes : 1/2"to 12"

Features :

  • Easy to handle
  • High compressive strength
  • Shrink proof
  • Light in weight
  • Water resistant
  • Microbes and pests proof (such as parasites, ants, termites, fungi etc. besides pthers)
  • Chemical Resistant (Dilute acids, mineral oils, diesel fuel, alkali, normal petrol, etc.)
  • Compatible to metals such as Gypsum, bricks, wood & paper

Physical & Mechanical Properties

Core Density BS4370 35 Kg./Cu.M
Average Density BS4370 35-40 Kg./Cu.M
Compressive strength parallel to rise BS 4370 Minimum 1.7 Kg./Sq.CM.
Compressive Strength perpendicular to rise BS4370 Minimum 2.0 Kg./Sq.CM.
Close Cells % BS 4735 90-95 % BS 4735 90-95 %
Burning Characteristics BS 4735 (Maximum 125mm) Self Extinguishing
Thermal Conductivity Initial at 10oC mean BS 4370 .014K cal/mhr. oC 016W/m oC -
Water vapour transmission 7gcm/m2 14 h mm Hg (3 perm inches) -

Insulation Tapes

The company is acknowledged as a trustworthy Insulation Tapes Exporters and Suppliers based in India. Insulation Tapes, provided by us, are extensively used in ducting, air conditioning, cold storages, etc. These Insulation Tapes are appreciated for their high insulation properties, chemical resistance and good bonding strength. Moreover, we specialize in providing these Insulation Tapes in proper packaging that too within the scheduled timeframe.

Attributes :

  • Excellent bonding strength
  • Superior quality
  • Durable
  • Economical

Used In :

  • Ducting
  • Air conditioning
  • Cold storages, etc.

Raw Materials Used :

  • Aluminium
  • Nitile
  • Trosline

Types :

  • Trosline tape
  • Aluminium tape
  • Duct tape
  • Nitrile tape

Thermocol Sheets

We are specialized in the exporting and supplying of a wide range of Thermocol Sheets in the national as well as international markets. We procure the Thermocol Sheets from reliable dealers for more reliability. We offer the Thermocol Sheets at the market leading rates for our esteemed clients. We are known among the dependable Thermocol Sheets Exporters and Suppliers, located in India.

Attributes :

  • Excellent quality
  • Superior performance
  • Durable
  • Reasonable price

Used As Insulation Tiles In :

  • Homes
  • Offices
  • Banks
  • Hotels
  • Showrooms, etc.

Aluminium Ducts

Heat resistant, leak proof, flexible, excellent ductility and durability best describe the quality of Aluminium Ducts, offered by us. These Aluminium Ducts are manufactured by using aluminium and are obtainable in different sizes. Aluminium Ducts are extensively used in air conditioning, exhausts and ducting. Consequently, we are identified as one of the renowned Aluminium Ducts Exporters and Suppliers based in India.

Attributes :

  • Super fine quality
  • Excellent performance
  • Durable
  • Affordable

Used In :

  • Air conditioning
  • Exhausts
  • Ducting

Types :

  • Semi Rigid
  • Insulated
  • Uninsulated

Available Sizes :

  • 4"
  • 6"
  • 8"
  • 10"
  • 12" and many more
Colors & packaging available : Silver ducts & Boxes